Nexo NXAMP4x2mk2 User Manual

NXAMPMK2 USER MANUAL PAGE 7 / 80
PRECAUTIONS
Please read carefully before proceeding. Please keep this manual in a safe place for future reference.
WARNING!
Always follow the basic precautions listed below to avoid the possibility of serious injury or even
death from electrical shock, short-circuiting, damages, fire or other hazards. These precautions
include, but are not limited to, the following:
POWER SUPPLY/POWER CORD
Only use the voltage specified as correct for the device. The required voltage is printed on the name plate
of the device.
Use only the included power cord if any. If you intend to use the device in an area other than the one you
purchased, the included power cord may not be compatible. Please check with NEXO.
Do not use the included power cord for other devices.
Do not place the power cord near heat sources such as heaters or radiators, and do not excessively bend
or otherwise damage the cord, place heavy objects on it, or place it in a position where anyone could walk
on, trip over, or roll anything over it.
Be sure to connect to an appropriate outlet with a protective grounding connection. Improper grounding can
result in electrical shock.
Remove the electric plug from the outlet when the device is not to be used for extended periods of time, or
during electrical storms.
When removing the electric plug from the device or an outlet, always hold the plug itself and not the cord.
Pulling by the cord can damage it.
To disconnect this device from the mains, unplug the power cord.
Even when the Standby/On switch is in standby status (display is off), electricity is still flowing to the
instrument at the minimum level. When you are not using the instrument for a long time, make sure you
unplug the power cord from the wall AC outlet.
Do not open the device, do not try to disassemble it neither to modify it in any way. The sy
include any user-serviceable parts. If the system seems to be malfunctioning or damaged, stop using it at
once and have it repaired by a NEXO qualified personnel.
WATER WARNING
Do not expose the system directly to the rain, do not immerse it into fluids, do not place objects filled with
liquid on the system. If a liquid gets into the device, turn off the power immediately and unplug the power
cord from the AC outlet. Then have it inspected by a NEXO qualified technician.
Never insert or remove an electric plug with wet hands.
IF YOU NOTICE ANY ABNORMALITY
If the power cord or plug becomes frayed or damaged, or if there is a sudden loss of sound during use of
the device, or any unusual smells or smoke should appear to be caused by it, immediately turn off the power
switch, disconnect the electric plug from the outlet, and have the device inspected by qualified NEXO service
personnel.
If this device should be dropped or damaged, immediately turn off the power switch, disconnect the electric
plug from the outlet, and have the device inspected by qualified NEXO service personnel.
LOCATION
Before moving the device, remove all connected cables.
When setting up the device, make sure that the AC outlet you are using is easily accessible. If some trouble
or malfunction occurs, immediately turn off the power switch and disconnect the plug from the outlet.

Nexo NXAMP4x2mk2 Specifications

General

Brand	Nexo
Model	NXAMP4x2mk2
Category	Controller
Language	English