NXAMPMK2 USER MANUAL PAGE 29 / 80
ARRAY-EQS
Select an Array-EQ in a channel (button is highlighted), then turn the wheel to change the Array-EQ setting.
You can select multiple channels, when a selected channel reaches the maximum value, it will cease to
increase by continuing to turn the wheel, but other selected channels may still increase the setting; Be careful
not to change a gap between two channel settings when selecting multiple channels at the same time.
In some special circumstances (cardioids setups for example) it is mandatory to have same Array-EQ
settings on two or more channels. Then changing the Array-EQ on one of these channels will automatically
adjust the Array-EQs on the other channels.
EQ
Press on any channel EQ thumbnail in area (1) to adjust the 8-band full parametric EQ filters parameters.
MULTI-CHANNEL SELECTION
You can press several preview curves in a short time to edit multiple channels at once. For example, if you
need to edit EQ for ch1 and ch4 together, press on thumbnail A and then quicky on thumbnail B.
After 1 second, the EQ main view is displayed allowing edition of selected channels together.
To Next Page
Loading...
Need help?
General
