PAGE 28 / 80 NXAMPMK2 USER MANUAL
DELAY
Select a channel (button is highlighted), then turn the wheel to change the delay setting.
You can select multiple channels, when a selected channel reaches the maximum value, it will cease to
increase by continuing to turn the wheel, but other selected channels may still increase the setting; Be careful
not to change a gap between two channel settings when selecting multiple channels at the same time.
In some special situation (active setups in same enclosure for example, like P12 active) it is mandatory to
have same delay settings on two or more channels. Then changing the delay on one of these channels will
automatically adjust the delays on the other channels.
GAIN
Select a channel (button is highlighted), then turn the wheel to change the gain setting.
You can select multiple channels, when a selected channel reaches the maximum value, it will cease to
increase by continuing to turn the wheel, but other selected channels may still increase the setting; Be careful
not to change a gap between two channel settings when selecting multiple channels at the same time.
In some special circumstances (cardioids setups for example) it is mandatory to have same gain settings on
two or more channels. Then changing the gain on one of these channels will automatically adjust the gains
on the other channels.
NB: You can adjust larger differences of gain between channels with the volume menu. There is no
difference between gain and volume setting; this distinction is only done by analogy with traditional
amplifiers. The CPU will always check gain, volume, patch, and headroom settings and decide what the best
combination is between analog or digital gain to optimize the dynamic range of the system.
To Next Page
Loading...
Need help?
General
