Step 1Turn
the
Camera On and Select 0 (Auto)
Mode
Indicators Displayed in 0 (Auto)
Mode
Shooting
mode
r!II
displayed in
01
(auto)
mode
Vibration
reduction/Motion
detection icon
When
!\t
is
displayed in
the
monitor, the effects
of
the
camera shake and subject
movement
are reduced.
The indicators and
photo
info displayed during shooting and playback will turn
off
after a
few
seconds
(~
107).
When the
monitor
has
turned
off
in standby
mode
to
save
power,
press
the power switch or the shutter-release
button
to
reactivate it
(~
112).
~
Monitor Brightness Boost
If it
is
difficult
to
see
the monitor display when shooting outdoors, holding
down
the [E]
button
while the power
is
on to switch monitor brightness
to
the maximum setting. Hold
down
the
[B
button
again
to
change back
to
the original brightness. The
~
icon will be displayed in the monitor
when the brightness setting
is
set
to the maximum by pressing the
[B
button.
~
Functions Available in 0 (Auto) Mode
In
0 (auto) mode, macro mode
(~
33)
and exposure compensation
(~
34)
can
be applied and
pictures
can
be taken using the
flash
mode
(~
30)
and self-timer
(~
32).
Pressing the
MENU
button
in
0 (auto) mode allows you to specify settings for
all
shooting menu items
(~
82)
~
Vibration Reduction and Motion Detection Icons
The Vibration reduction option effectively reduces blur, caused by slight hand movement known
as
camera
shake,
that
commonly
occurs when shooting
with
zoom applied or at slow shutter
speeds.
The
Motion detection option detects camera shake and subject movement with shooting, and
increases the shutter speed
to
reduce their effects. Motion detection does not function when
recording movies.
The Vibration reduction/Motion detection icons indicate the following:
•
4J:
The setup menu's
(115
101)
Vibration reduction option
(~
109)
is
set
to
On, and the Motion
detection
option
(~
110)
is
set
to
Auto (default settings).
•
MRl:
The Vibration reduction option
is
set
to On, and the Motion detection option
is
set
to Off.
'l;,o<IJ:
The
Motion
detection option
is
set
to
Auto,
and the Vibration reduction option
is
set
to
Off.
• Off: Both the Vibration reduction and Motion detection options
are
set
to
Off.
•
Set
Vibration reduction
to
Off
when using a tripod
to
stabilize the camera during shooting.
Internal
memory
indicator
Pictures will be recorded
to
internal
memory
(approx.
45
MB).
When
memory
card
is
inserted,
IT:J
is
not
displayed and
pictures will be recorded
to
memory
card.
Image mode
The combination
of
image size and
image quality (compression)
is
displayed.
The default setting
is
mm
Normal
(3,648 x 2,736).
23
To Next Page
Loading...
Need help?
General
Weight and Dimensions
