- 112 -
Network Setting Items
5
5. Network Settings
Shaded text indicates the factory default setting.
Item
Setting Description
TELNET
Web
browser
Conīæguration
Tool
(Network
Setting Plug-in)
Network
Card Setup
(Windows)
Network
Card
Setup
(Mac)
Consumable
Warning
Event 1-5
Consumables
Warning
- - - DISABLE Set whether to notify
of warnings concerning
printer consumables
(Toner cartridge, Image
drum unit, etc.). This
setting is available only
when selecting [EVENT].
Immediate
-
48H 45M
ENABLE
Consumable
Warning
Period 1-5
Consumables
Warning
- - - ENABLE Set whether to notify
of warnings concerning
printer consumables
(Toner cartridge, Image
drum unit, etc.). This
setting is available
only when selecting
[PERIOD].
DISABLE
Consumable
Error Event
1-5
Consumables
Error
- - - DISABLE Set whether to notify of
errors concerning printer
consumables (Toner
cartridge, Image drum
unit, etc.). This setting
is available only when
selecting [EVENT].
Immediate
-
48H 45M
ENABLE
Consumable
Error Period
1-5
Consumables
Error
- - - ENABLE Set whether to notify of
errors concerning printer
consumables (Toner
cartridge, Image drum
unit, etc.). This setting
is available only when
selecting [PERIOD].
DISABLE
Maintenance
Warning
Event 1-5
Maintenance
Unit Warning
- - - DISABLE Set whether to notify of
a warnings concerning
maintenance units (fuser
unit, belt unit etc.). This
setting is available only
when selecting [EVENT].
Immediate
-
2H 0M
-
48H 45M
ENABLE
Maintenance
Warning
Period 1-5
Maintenance
Unit Warning
- - - ENABLE Set whether to notify of
a warnings concerning
maintenance units (fuser
unit, belt unit etc.).
This setting is available
only when selecting
[PERIOD].
DISABLE
Maintenance
Error Event
1-5
Maintenance
Unite Error
- - - DISABLE Set whether to notify
of errors concerning
maintenance units (fuser
unit, belt unit etc.). This
setting is available only
when selecting [EVENT].
Immediate
-
48H 45M
ENABLE
Maintenance
Error Period
1-5
Maintenance
Unite Error
- - - ENABLE
Set whether to notify
of errors concerning
maintenance units
(fuser unit, belt unit
etc.). This setting is
available only when
selecting [PERIOD].
DISABLE