- 39 -
1
1. Convenient Print Functions
For Windows PS Printer Driver
1 Open the le you want to print.
2 From the [File] menu, select [Print].
3 Click [Preferences] or [Properties].
4 Select the [Job Options] tab.
5 Select [Encrypted Secure Print].
6 Enter a password in the [Password]
box and congure other options if
necessary.
Reference
● For details on the options, refer to the on-screen
explanations of the driver.
7 Click [OK].
8 Congure other settings if necessary and
then start printing.
The print job is sent to the printer, but is not
printed.
9 Press the <Fn> key.
Memo
● When a printer is in the power saving mode, press
the <POWER SAVE> button to restore from the
mode.
10 Enter <0>, <0> and <1> using the
ten-key pad and press the <ENTER>
button.
11 Enter the password you set in step 6
in the [Password] box and then press
the <ENTER> button to start a job
searching.
- Press the <CLEAR> key if you enter a
wrong number.
- Press the <CANCEL> button if you want
to stop the job search.
12 Make sure that [Print] is selected and
press the <ENTER> button.
If you select [Delete], you can delete the print
job, and all of the encrypted jobs with the same
password are deleted as well.
Watermark Printing
You can print a watermark in addition to the text
of the printed le.
Note
● This function is not available with the Mac OS X PS printer
driver.
● Watermarks are not printed properly for booklet printing.
For Windows PCL Printer Driver
1 Open the le you want to print.
2 From the [File] menu, select [Print].
3 Click [Preferences] or [Properties].
4 Select [Extend] tab.
5 Click [Watermarks].
6 Click [New].
7 Specify a text, size, angle, trim and
position for the watermark and then click
[OK].
8 Click [OK].
9 Congure other settings if necessary and
then start printing.
For Windows PS Printer Driver
1 Open the le you want to print.
2 From the [File] menu, select [Print].
3 Click [Preferences] or [Properties].
4 Select [Job Options] tab.
5 Click [Watermark].
6 Click [New].
7 Specify a text, size, angle, trim and
position for the watermark and then click
[OK].
8 Click [OK].