Oki C834DN User Manual

- 142 -
Other Operations
5
5. Network Settings
8 Click [Start] and select
[Administrative Tools]>[DHCP] to
launch the [DHCP] wizard.
9 On the DHCP list, select a server to use.
10 From the [Action] menu, select [New
Scope].
11 On the [New Scope Wizard], follow the
on-screen instructions and congure the
settings as necessary.
Memo
● Be sure to congure the default gateway settings.
● On the [Activate Scope] screen, select [Yes, I
want to activate the scope now].
12 Click [Finish].
13 Select the new scope from the DHCP list
and then select [Reservations].
14 From the [Action] menu, select [New
Reservation].
15 Congure the settings.
16 Click [Add].
17 Click [Close].
18 From the [File] menu, select [Exit].
Conguring Your Printer
The following explains how to congure your
printer to use DHCP/BOOTP.
Note that since the DHCP/BOOTP protocol is
enabled by factory default, you do not have to
perform this procedure.
Memo
● The following steps are explained using Network Card
Setup as an example. The steps and menus may differ
depending on the software you use.
1 Turn on the printer.
2 Turn on your computer and insert the
software DVD-ROM.
3 Click [Run Setup.exe].
If the [User Account Control] dialog box
appears, click [Yes].
4 Read the language, and then click
[Next].
5 Select a model and then click [Next].
6 Read the license agreement and click
[I Agree].
7 Read the [Environmental advice for
Users] and then click [Next].
8 Select [Device Conguration]>
[Network Card Setup Utility].
9 Select your printer from the list.
10 From the [Setting] menu, select
[Setting Printer].
11 Enter the IP address and then click
[OK].
12 Enter the password at [Enter
Password] and then click [OK].
- The factory default password is the last six
digits of the MAC address.
- The password is case-sensitive.
13 Click [OK] on the conrmation window.
The printer restarts to enable the new settings.
The printer status icon changes to red during the
restart. The status icon changes to green when
the printer has restarted and the new settings
have been enabled.
14 From the [File] menu, select [Exit] to
close the Network Card Setup.

Oki C834DN Specifications

General

Brand	Oki
Model	C834DN
Category	Printer
Language	English