5-1-3
Lens Module / IP40 Configuration
Attaching the Lens Module
WARNING
This product must be used according to the instructions in the manual or instruction sheet.
Failure to observe this may result in impairment of functions and performance of the product.
Caution
In rare events, there is a possibility of mild burns. Do not touch the camera body while it is in
operation, or just after power is turned OFF, since it can be extremely hot.
When attaching the lens module or cover, make sure to tighten all attaching screws securely.
Failure to do so may damage the unit, causing malfunction, or injury.
Precautions for Safe Use
• Do not use waterproof packing that has been scratched, or has any foreign matter adhering
to it.
• The lens module is specifically designed for use with the FHV Series Smart Camera Do not
use it for any other purpose.
• Do not remove or replace the lens or any other part of the lens module.
• Be sure to turn OFF the power of the Smart Camera itself and any peripheral devices con-
nected to it when attaching or removing the lens module. Failing to do so can cause equip-
ment malfunction or damage.
• Tighten the mounting screws securely with the specified torque and in the order described in
this manual.
• Do not apply excessive stress to lenses and connectors. It may damage the connectors.
• Do not touch the lens or cover with bare hands. It may result in malfunction or damage to the
product.
• When using a lens module without a lighting module or waterproof cover, be sure that they
are protected using the covers included with the product specifically for that purpose.
• Please ensure the compatibility of the lens module to the Smart Camera before attempting to
attach it. If they are not compatible, it may result in malfunction.
5 Installation
5 - 5
FHV Series Smart Camera Setup Manual (Z408-E1)
5-1 Assembling Equipment
5
5-1-3 Lens Module / IP40 Configuration
To Next Page
Loading...
Need help?
General
