6-3
Precautions for I/O Interface
Precautions for Safe Use
• Use only the cables designed specifically for the product. Use of other cables may result in
malfunction or damage to the product.
• Always turn OFF the power to the Smart Camera before connecting or disconnecting a cable.
Connecting the cable while power is being supplied may result in damage to the camera or
peripheral devices.
• Do not apply torsion stress to the cable. It may damage the cable.
• Secure the minimum bending radius of the cable. Otherwise, the cable may be damaged.
Precautions for Correct Use
• Check the following items on the communications cables that are used in the network.
- Are there any breaks?
- Are there any shorts?
- Are there any connector problems?
• When you connect the cable to the communications connectors on devices, firmly insert the
communications cable connector until it locks in place.
• Do not lay the communications cables together with high-voltage lines.
• Do not lay the communications cable near devices that generate noise.
• Do not lay the communications cables in locations subject to high temperatures or high hu-
midity.
• Do not lay the communications cables in locations subject to excessive dirt and dust or to oil
mist or other contaminants.
6 Power Supply and I/O Interface
6 - 5
FHV Series Smart Camera Setup Manual (Z408-E1)
6-3 Precautions for I/O Interface
6
To Next Page
Loading...
Need help?
General
