Waterproof
packing
Hood cover
5-1-5
Lens Module / Internal Lighting / IP67 Configuration
Attaching the Lighting Module
Please attach it following these procedures.
WARNING
This product must be used according to this manual or instruction sheet. Failure to do so
may result in impairment of functions and performance of the product.
Continually look at the LED light may in rare cases cause visual impairment. Do not stare
directly into the light emitted from the lighting module. Likewise, if an object with a reflective
surface is used, take care not to allow the reflected light to enter your eyes.
Caution
In rare events, there is a possibility of mild burns. Do not touch the camera body while it is in
operation, or just after power is turned OFF, since it can be extremely hot.
When attaching the lighting module or cover, make sure to tighten all attaching screws se-
curely. Failure to do so may damage the unit, causing malfunction, or injury.
5 Installation
5 - 10
FHV Series Smart Camera Setup Manual (Z408-E1)
To Next Page
Loading...
Need help?
General
