14 LD Platform OEM User's Guide 11970-000 Rev H1
1.3 How Can I Get Help?
SetNetGo
The SetNetGo OS runs on the LD Platform core and Enterprise Manager appliance. It is the
host OS in which ARAM and ARAMCentral run.
The SetNetGo interface in the MobilePlanner software is for configuring the platform’s Ethernet
settings, upgrading software, and performing systems diagnostics, such as retrieving log files.
It is accessible when connected via the maintenance and management Ethernet ports, or via
wireless Ethernet if enabled.
NOTE:You can use a web browser to connect directly to the SetNetGo OSon a plat-
form. This allows your IT support to set up the network for you, without using
MobilePlanner, which requires a license.
1.3 How Can I Get Help?
Refer to the corporate websites:
http://www.ia.omron.com
and
http://www.adept.com
Related Manuals
This manual covers the installation, setup, operation, and maintenance of an LDPlatform
OEM. There are additional manuals that cover configuring the platform. See the following
table. These manuals are available on the software media delivered with your system.
Table 1-1. Related Manuals
Manual Title Description
Mobile Robot LDSafety
Guide
Contains general safety information for all Omron Adept Tech-
nologies, Inc. LDPlatform OEM-based AIVs.
Mobile Robot Software
Suite User's Guide
Covers MobilePlanner software, the SetNetGo OS, and most of
the configuration of an LDPlatform OEM.
Enterprise Manager
1100 User's Guide
Covers the Enterprise Manager 1100 system, which is hardware
and software used for managing a fleet of AIVs.
LDPlatform Peripherals
User's Guide
Covers peripherals, such as the Touchscreen, Call/Door box, and
Acuity Localization options.
To Next Page
Loading...
Need help?
General
