Omron MX2 User Manual

311
Appendix C
Drive Parameter Setting Tables
C-1 Introduction
This appendix lists the user-programmable parameters for the MX2 series
inverters and the default values for European and U.S. product types. The
right-most column of the tables is blank, so you can record values you have
changed from the default. This involves just a few parameters for most appli-
cations. This appendix presents the parameters in a format oriented toward
the keypad on the inverter.
C-2 Parameter Settings for Keypad Entry
MX2 series inverters provide many functions and parameters that can be con-
figured by the user. We recommend that you record all parameters that have
been edited, in order to help in troubleshooting or recovery from a loss of
parameter data.
C-2-1 Main Profile Parameters
Note Mark "✓" in B031=10 shows the accessible parameters when B031 is set
"10", high level access.
Inverter model
MX2
MFG. No.
This information is printed
on the specication label
located on the right side
of the inverter
"F" Group Parameters Default Setting B031=10 User
Setting
Func.
Code
Name (EU)
F001 Output frequency setting 0.0 ✓
F002
F202
Acceleration time (1)
Acceleration time (1),
2nd motor
10.0
10.0
✓
✓
F003
F203
Deceleration time (1)
Deceleration time (1),
2nd motor
10.0
10.0
✓
✓
F004 Keypad RUN key routing 00 ✕

Omron MX2 Specifications

General

Brand	Omron
Model	MX2
Category	Inverter
Language	English