Smart Card
C A U T I O N
n Do not:
Hit, bend, or drop the card.
Touch the contact part with fingers or metal object.
Place the card in very hot location for a long time.
Remove the card immediately after inserting it.
Inserting/Removing the Smart Card
<Only for model with Smart Card slot>
You need software to use a Smart Card.
To insert the card
1. Slide the latch (A).
2. Insert the Smart Card to the lower slot (B) with the contact part (C) in front.
3. Close the cover.
To close the cover, push on the “CLOSE POSITION” of the slot cover.
Insert the card untilit securely fits into the slot.
To Next Page
Loading...
Need help?
General