145
4K Photo and Drive Settings
Taking pictures automatically at set intervals
[Time Lapse Shot]
Recording mode:
You can preset data such as recording start time and time lapse to take still pictures
automatically. This setting is convenient for taking pictures at constant intervals for
landscape scenes, observation of the gradual changes in animals/plants, and other
applications. The pictures are recorded as a set of group pictures.
• Complete the date and time settings in advance. (→40)
1
Set the menu
→ [Rec] → [Time Lapse Shot]
[Shooting Interval
Setting]
[ON]: Sets the time from recording start time to the next recording
start time.
[OFF]: After recording is finished, the next recording is started without
any interval.
[Start Time] [Now] Starts the recording by fully-pressing the shutter
button.
[Start Time Set] Any time up to 23 hours 59 minutes ahead can
be set.
Press to select the item (hour and/or
minute), and
to set the start time, and press
[MENU/SET]
[Image Count] /
[Shooting Interval]
*
1
: Select the item (digit)
: Setting
[MENU/SET]: Set
*
1
Can be set only when [Shooting Interval Setting] is set to [ON].
• The estimated recording ending time is displayed on the setting screen. (When
[Shooting Interval Setting] is set to [OFF], the recording ending time is displayed
only when the focus mode is set to [MF] in Shutter-Priority AE Mode or Manual
Exposure Mode.)
• The camera may not be able to record using the pre-set interval and number of
pictures to be recorded or may not finish recording at the estimated recording
ending time under some recording conditions.
2
Press to select [Start] and press [MENU/SET]
3
Press the shutter button halfway to focus
To Next Page
Loading...
Need help?
General
