68
Recording mode
Taking pictures with automatic settings (Intelligent Auto Mode)
Setting brightness (exposure)/blurriness of the background
(Defocus control function)
Recording mode:
When [Exposure Dial] (→49) is set to [ON]
1
Rotate the Exposure Compensation dial to set the brightness
• You can set the exposure compensation value in the range between –3 EV and +3 EV.
• You can set the blurriness of the background with touch screen operations (below).
When [Exposure Dial] (→49) is set to [OFF]
1
Press the rear dial to display the setting screen
• The brightness (exposure) operation screen is displayed. Press [Fn1] to operate the defocus
control, and then press it again to finish the operation.
2
Rotate the rear dial to set
• Press [MENU/SET] to return to the recording screen.
When setting the brightness (exposure)
• You can set the exposure compensation value in the range
between –5 EV and +5 EV.
• Press
to set the Exposure Bracket. (→142)
OFF
When setting the background defocusing
• Pressing [Q.MENU/
] button will cancel the setting.
• Auto Focus Mode is set to [
]. The position of the AF area can
be set by touching the screen. (Its size cannot be changed.)
8.05.64.0
250 125 60 30 15
■
With touch screen operations
Touch [ ]
Touch the item you want to set
[ ]: Colouring
[ ]: Degree of defocusing
[ ]: Brightness (Displayed only when [Exposure Dial] is set
to [OFF])
Drag the slide bar or exposure meter to set
• Press [MENU/SET] to return to the recording screen.
●
Depending on the lens used, you may hear a sound from the lens while operating Defocus
Control. This is due to the aperture operation of the lens and is not a malfunction.
●
Depending on the lens used, operational sound of the Defocus Control may be recorded during
the recording of a motion picture when the function is used.
To Next Page
Loading...
Need help?
General
