72
Recording mode
Taking pictures by setting the aperture value and shutter speed
Taking pictures by setting the aperture value and shutter speed
(Manual Exposure Mode)
Determine the exposure by manually setting the aperture value and the shutter speed.
1
Set mode dial to [ ]
2
Rotate the rear dial to set the shutter speed, and rotate
the front dial to set the aperture value
Aperture value
Shutter speed
Manual Exposure Assist
Exposure meter
Shutter speeds that can be set (seconds)
T (Time), 60 - 1/4000
(When the mechanical shutter is used)
1 - 1/16000
(When the electronic shutter is used)
8.05.6 114.0
8 15 30 60 125
Optimising the ISO sensitivity for the aperture value and shutter speed
When the ISO sensitivity is set to [AUTO], the camera sets the ISO sensitivity automatically so that the
exposure will be appropriate for the aperture value and shutter speed.
• Depending on recording conditions, an appropriate exposure may not be set or the ISO sensitivity
may become higher.
Manual exposure assist (estimate)
Shows pictures with standard brightness (appropriate exposure).
Shows brighter pictures. For the appropriate exposure, either use a faster shutter
speed or increase aperture value.
Shows darker pictures. For the appropriate exposure, either use a slower shutter
speed or reduce aperture value.
●
When you use a lens with an aperture ring, the aperture ring setting takes priority.
●
When the flash is activated, the fastest shutter speed that can be selected is 1/200th of a second.
To Next Page
Loading...
Need help?
General
