302
Connecting with other devices
Viewing on TV screen
Recording while monitoring camera images
When using the HDMI output, you can record still pictures and
motion pictures while monitoring the camera image on a TV,
etc.
■
Switching the information displayed
You can change the display shown during HDMI output using [HDMI Info Display (Rec)]
in [TV Connection] on the [Setup] menu.
[ON]: The camera display is output as is.
[OFF]: Only images are output.
●
When you use the HDMI output during recording, the output image quality will be automatically
switched to match the connected device.
• However, in the following cases, the [Rec Quality] setting in the [Motion Picture] menu is applied
to the output images. (If the connected device does not support the setting, the optimal setting
for the device will be automatically selected for the HDMI output image quality.)
– During motion picture recording
– Creative Video Mode
– When [Rec Area] is set to [
]
●
If you use the HDMI output during recording, aspect ratio setting is fixed to [16:9].
●
When the camera is connected to an external monitor or a TV that supports 4K motion picture, if
you use one of the following settings, the angle of view becomes even narrower than normal:
• [4K/100M/25p], [4K/100M/30p] or [4K/100M/24p] in [Rec Quality]
• [4K Live Cropping]
●
When using the Auto Focus Mode [ ] or MF assist, the screen cannot be enlarged in windowed
mode.
●
[Ex. Tele Conv.] ([Motion Picture]) is not available. (Except in Creative Video Mode)
●
An electronic sound or shutter sound will not sound.
●
When you check the image and sound from the TV connected to the camera, the microphone of
the camera may pick up the sound from the speakers of the TV, producing an abnormal sound
(audio feedback). If this occurs, move the camera away from the TV or lower the volume on the
TV.
●
If you set up a Wi-Fi connection while using the HDMI output, no image will be displayed on the
camera monitor.
●
Some of setting screens are not output through the HDMI connection.
●
This function is not available in the following cases:
• During panorama picture recording
• When recording 4K photos
• When recording using [Post Focus]
To Next Page
Loading...
Need help?
General
