95
Focus, Brightness (Exposure) and Colour tone Settings
Taking pictures with Auto Focus
1
Set the focus mode lever to [AFS/AFF] or
[AFC]
• The Focus Mode will be set. (→96)
2
Press [ ] button ( )
3
Press to select AF Mode and then
press [MENU/SET]
• Switching [AF Mode] (→97)
4
Press the shutter button halfway
Focus display
( When focus is aligned: illuminated
When focus is not aligned: flashing)
AF area
(When focus is aligned: green)
• Two “beep” sounds are heard and Auto Focus is activated.
• When you take a picture in a dark location, [ ] is displayed for the focus display
and it may take longer to adjust focus than usual.
• If the camera detects stars in the night sky after displaying [ ], Starlight AF will
be activated. When focus is achieved, the focus indication [ ] and AF areas in
focus are displayed. (Starlight AF cannot perform detection on the edges of the
screen.)
Subjects/environments which may make focusing difficult:
• Fast-moving or extremely bright objects, or objects with no colour contrast.
• Taking pictures through glass or near objects emitting light.
• In the dark, or with significant jitter.
• When too close to object or when taking pictures of both distant and close objects together in
the same picture.
●
If you zoom in/out after focusing on a subject, the focus may lose its accuracy. In that case, re-
adjust the focus.
To Next Page
Loading...
Need help?
General
