245
Using Menu Functions
Menu list
[Clear Retouch]
You can erase unnecessary parts recorded on the pictures taken.
• The erasure operation can only be
performed by touching. [Clear Retouch]
automatically enables the touch
operation.
→ [Playback] → [Clear Retouch]
1
Use to select a still picture and press [MENU/SET]
SCALINGSCALING
REMOVE
REMOVE
2
Drag your finger over the part you want to erase
• The parts to be erased are coloured.
• Touching [Undo] will return the coloured part back to its previous
state.
Erasing details (enlarging the display)
UndoUndo
SCALINGSCALING
REMOVE
REMOVE
Touch [SCALING]
• On the touch screen, pinch out your two fingers to zoom in, and
pinch in your two fingers to zoom out.
• Dragging the screen allows you to move the enlarged part.
Touch [REMOVE]
• This will bring you back to the operation of dragging your finger
over the part you want to erase. The part you want to erase can
be dragged even while the picture is enlarged.
3
Touch [Set]
4
Touch [Save] or press [MENU/SET]
●
Pictures may appear unnatural because the background of deleted parts is artificially created.
●
Edit group pictures one by one. The edited pictures will be newly saved separately from the
original group pictures.
●
Not available when the viewfinder is in use.
●
When an HDMI micro cable is connected, [Clear Retouch] is disabled.
●
This function is not available in the following cases:
• Panorama pictures
• Motion pictures
• 4K burst files
• Pictures recorded using [Post Focus]
• Still pictures recorded with the [Quality] setting [
]
To Next Page
Loading...
Need help?
General
