Adjusting loudness
Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.
1 Display the “Audio Menu ” screen.
= For details, refer to Displaying the
“Audio Menu” screen on page 116.
2 Turn MULTI-CONTROL to select “Loud-
ness”.
3 Press the centre of MULTI-CONTROL to
turn loudness on.
Loudness level (e.g., Mid) appears in the dis-
play.
p To turn loudness off, press
MULTI-CONTROL again.
4 Press MULTI-CONTROL left or right to
select a desired level.
Each time MULTI-CONTROL is pressed left or
right, level is selected in the following order:
Low — Mid — High
Using subwoofer output
The navigation system is equipped with a sub-
woofer output mechanism, which can be
turned on or off.
1 Display the “Audio Menu ” screen.
= For details, refer to Displaying the
“Audio Menu” screen on page 116.
2 Turn MULTI-CONTROL to select “Sub-
Woofer1”.
3 Press the centre of MULTI-CONTROL to
turn subwoofer output on.
p To turn subwoofer output off, press
MULTI-CONTROL again.
4 Press MULTI-CONTROL left or right to
set the phase of subwoofer output.
Each time MULTI-CONTROL is pressed left or
right, the phase of subwoofer output is se-
lected in the following order:
Reverse (Reverse phase) — Normal (Normal
phase)
5 Turn MULTI-CONTROL to select “Sub-
Woofer2”.
6 Press MULTI-CONTROL left or right to
select cut-off frequency.
Each time MULTI-CONTROL is pressed left or
right, frequencies are selected in the following
order:
50 Hz — 63 Hz — 80 Hz — 100 Hz — 125 Hz
7 Press MULTI-CONTROL up or down to
adjust the output level of the subwoofer.
Each time MULTI-CONTROL is pressed up or
down, subwoofer level increases or decreases.
“+6” to “-24” is displayed as the level is in-
creased or decreased.
Engb
119
Chapter
22
Customising preferences
Customising preferences
To Next Page
Loading...
Need help?
General
Weight and Dimensions
