Setting a route to your
destination
1 Searching for a location.
= For details, refer to Chapter 7.
After searching for the destination, the Lo-
cation confirmation screen appears.
2 Touch [OK].
Location confirmation screen
The destination is set, and then route calcula-
tion starts.
When the route calculation is completed,
Route confirmation screen appears.
p If you press the MODE button during route
calculation, the calculation is cancelled
and the map screen appears.
# Touch [Scroll].
The map display changes to the scroll mode. You
can fine-tune the location in the scroll mode, and
then you can set the location as your destination
or do various operations.
# Touch [Waypoint].
The location is added to the “Waypoints List”
screen.
p If a destination is not set, [Waypoint] is not
available.
3 Touch [OK].
Route confirmation screen
12 3 4
Sets the displayed route as your route, and
starts the route guidance.
1 Distance to the destination
2 Travel time to your destination
3 Estimated fuel cost to your destination
= For details, refer to Inputting the fuel
consumption information for calculating
the fuel cost on page 72.
4 Route calculation condition
# Touch
.
The message confirming whether to cancel the
calculated route appears.
Touch [Yes] to cancel the calculated route, and
then the map screen appears.
2
3
1
1 Options
= For details, refer to Modifying the route
calculation conditions on the next page.
2 Profile
= For details, refer to Checking the current
itinerary on page 45.
3 Waypoints
= For details, refer to Editing waypoints on
page 45.
Engb
43
Chapter
08
After the location is decided
After the location is decided
To Next Page
Loading...
Need help?
General
Weight and Dimensions
