This chapter describes the basic operations of
the audio source.
You can play or use the following sources with
the navigation system.
! TUNER (FM, MW/LW)
! CD
! ROM (MP3, AAC, WAV, WMA)
! USB
! iPod
! AUX (auxiliary device)
Switching the audio source
1 Press the MODE button when the map
of the current location is displayed.
The audio operation screen appears.
2 Press the SRC/OFF button repeatedly to
switch between the following sources.
TUNER (tuner) — CD (built-in CD player) —
USB (USB storage device) or iPod (iPod con-
nected using USB input) — AUX (auxiliary de-
vice)
p In the following cases, the sound source
cannot to be used:
! When a unit corresponding to each
source is not connected to the naviga-
tion system.
! When no disc is set in the navigation
system.
! When “AUX” in the “Initial Setting”
screen is set to “Off”.
= For details, refer to Switching the aux-
iliary setting on page 115.
Turning off the audio source
% Press and hold the SRC/OFF button
until the audio source turns off.
The audio source is switched off.
p To return to the display of each source,
press the SRC/OFF button.
Engb
77
Chapter
15
Basic operations of the audio source
Basic operations of the audio source