Pioneer VSX 1020 User Manual

Basic Setup 04
37
En
English
Français
Deutsch
Nederlands
Italiano
Español
Chapter 4:
Basic Setup
Changing the OSD display
language (OSD Language)
The language used on the Graphical User
Interface (GUI) screen can be changed.
• The explanations in these operating
instructions are for when English is
selected for the GUI screen.
1 Switch on the receiver and your TV.
2 Press on the remote control,
then press
HOME MENU .
A GUI screen appears on your TV. Use //
/ and ENTER to navigate through the
screens and select menu items. Press
RETURN to exit the current menu.
3 Select ‘ System Setup ’ from the HOME
MENU
.
4 Select ‘
OSD Language ’ from the System
Setup
menu.
5 Select the desired language.
• English
• French
• German
• Italian
• Spanish
• Dutch
• Russian
6 Select ‘ OK ’ to change the language.
The setting is completed and the System Setup
menu reappears automatically.
Automatically setting up for
surround sound (Auto MCACC)
The Auto MCACC Setup measures the
acoustic characteristics of your listening area,
taking into account ambient noise, speaker
connection and speaker size, and tests for both
channel delay and channel level. After you
have set up the microphone provided with your
system, the receiver uses the information from
a series of test tones to optimize the speaker
settings and equalization for your particular
room.
Make sure you do this before moving on to
Playing a source on page 42.
Important
• Make sure the microphone and speakers
are not moved during the Auto MCACC
Setup.
• Using the Auto MCACC Setup will
overwrite any existing settings for the
MCACC preset you select.
• Before using the Auto MCACC Setup, the
headphones should be disconnected.
CAUTION
• The test tones used in the Auto MCACC
Setup are output at high volume.
THX
®
THX is a trademark of THX Ltd., which may be
registered in some jurisdictions. All rights
reserved.
RECEIVER
A/V RECEIVER
Exit Return
a. Manual SP Setup
b. Input Setup
c. OSD Language
4.SystemSetup
d. Network Setup
e. Other Setup
VSX-1020_UC.book 37 ページ ２０１０年１月７日 木曜日 午後６時０分

Pioneer VSX 1020 Specifications

General

Impedance	6 Ω
Frequency range	5 - 100000 Hz
Audio output channels	7.1 channels
Audio A/D Converter (ADC)	24-bit/96kHz
Signal-to-Noise Ratio (SNR)	100 dB
Total Harmonic Distortion (THD)	1 %
Audio system	Dolby TrueHD, DTS-HD Master Audio
Output power	140 W
Channels quantity	63 channels
Dimensions (WxDxH)	420 x 379 x 158 mm
Power requirements	AC 220 - 230 V, 50/60 Hz
HDMI ports quantity	7
Connectivity technology	Wired
Digital audio optical in	2
Product color	Black
Power consumption (standby)	0.6 W
Power consumption (typical)	245 W
Headphone connectivity	3.5 mm

Weight and Dimensions

Weight	10200 g