Pioneer VSX 1020 User Manual

Basic playback 05
51
En
English
Français
Deutsch
Nederlands
Italiano
Español
5 Select the ‘ Passcode ’ setting you want.
Select the same passcode as the Bluetooth
wireless technology device you wish to
connect.
• 0000/1234/8888 – Select the passcode
from these options. These are the
passcodes that can be used in most cases.
• Others – Select to you use a passcode
other than those mentioned above.
6 If you selected Others in step 5, enter the
passcode.
Use / to select a number and / to
move the cursor.
7 Follow the instructions displayed on the
GUI screen to conduct pairing with the
Bluetooth wireless technology device.
Switch on the Bluetooth wireless technology
device that you want to make pairing, place it
near the receiver and set it into the pairing
mode.
8 Check to see that the Bluetooth ADAPTER
is detected by the
Bluetooth wireless
technology device.
When Bluetooth wireless technology device is
connected:
CONNECTED appears in the receiver display.
1
When Bluetooth wireless technology device is
not connected:
Go back to the passcode setting in step 5. In
this case, perform the connection operation
from the side of the Bluetooth wireless
technology device.
9From the Bluetooth wireless technology
device list, select
Bluetooth ADAPTER and
enter the Passcode selected in the step 5.
2
Listening to Music Contents of
Bluetooth wireless technology
device with Your System
1 Press ADAPTER on the remote control to
switch the receiver to
ADAPTER input mode.
3
2 Connect the Bluetooth wireless
technology device to the
Bluetooth
ADAPTER.
3 Start playback of music contents stored in
Bluetooth wireless technology device.
This receiver’s remote control buttons can be
used for basic playback of files stored on the
Bluetooth wireless technology device.
4
The Bluetooth
®
word mark and logos are
registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by Pioneer
Corporation is under license. Other
trademarks and trade names are those of their
respective owners.
Note
1 The system can display alphanumeric characters only. Other characters may not be displayed correctly.
2 Passcode may in some case be referred to as PASSKEY or PIN code.
3 When the Bluetooth ADAPTER is not plugged into the ADAPTER PORT, NO ADAPTER will be displayed if ADAPTER
input mode is selected.
4• Bluetooth wireless technology device should be compatible with AVRCP profile.
• Depending on Bluetooth wireless technology device you use, operation may differ from what is shown in the remote
control buttons.
S.RETRIEVER
MIDNIGHT
TV
/ DTV MPX PQLS
PHASE
CTRL STATUS
PGM MEMORY MENU
AUDIO
HDD DVD
213
VSX-1020_UC.book 51 ページ ２０１０年１月７日 木曜日 午後６時０分

Pioneer VSX 1020 Specifications

General

Impedance	6 Ω
Frequency range	5 - 100000 Hz
Audio output channels	7.1 channels
Audio A/D Converter (ADC)	24-bit/96kHz
Signal-to-Noise Ratio (SNR)	100 dB
Total Harmonic Distortion (THD)	1 %
Audio system	Dolby TrueHD, DTS-HD Master Audio
Output power	140 W
Channels quantity	63 channels
Dimensions (WxDxH)	420 x 379 x 158 mm
Power requirements	AC 220 - 230 V, 50/60 Hz
HDMI ports quantity	7
Connectivity technology	Wired
Digital audio optical in	2
Product color	Black
Power consumption (standby)	0.6 W
Power consumption (typical)	245 W
Headphone connectivity	3.5 mm

Weight and Dimensions

Weight	10200 g