Control with HDMI function 07
65
En
English
Français
Deutsch
Nederlands
Italiano
Español
About connections with a product of
a different brand that supports the
Control with HDMI function
The synchronized operations below can be
used when the receiver’s Control with HDMI
function is connected to a TV of a brand other
than Pioneer that supports the Control with
HDMI function. (Depending on the TV,
however, some of the Control with HDMI
functions may not work.)
• When the TV’s power is set to standby, the
receiver’s power is also set to standby.
(Only when the input for a component
connected to the receiver by HDMI
connection is selected or when watching
the TV)
• The sound of TV programs or an external
input connected to the TV can also be
output from the speakers connected to the
receiver. (This requires connection of an
optical digital cable, etc., in addition to the
HDMI cable.)
The synchronized operations below can be
used when the receiver’s Control with HDMI
function is connected to a player or recorder of
a brand other than Pioneer that supports the
Control with HDMI function.
• When playback starts on the player or
recorder, the receiver’s input switches to
the HDMI input to which that component is
connected.
See the Pioneer website for the latest
information on the models of non-Pioneer
brands and products that support the Control
with HDMI function.
Setting the PQLS function
PQLS (Precision Quartz Lock System) is a
digital audio signal transfer control technology
using the Control with HDMI function. It offers
higher-quality audio playback by controlling
audio signals from the receiver to a PQLS
compatible player, etc. This enables removing
jitter that has a negative effect on the quality of
the sound and is generated upon
transmission.
This receiver supports the “PQLS 2 ch Audio”
that is only activated when playing an audio CD
(CD-DA).
This function is activated when Control is set
to ON.
1
• Press , then press
PQLS
to
select PQLS setting.
The setting is displayed on the front panel
display.
• PQLS
AUTO – PQLS is enabled. A
precision quartz controller in this receiver
eliminates distortion caused by timing
errors (jitter), giving you the best possible
digital-to-analog conversion from audio CD
sources when you use the HDMI interface.
This is valid as an HDMI function for PQLS-
compatible players.
• PQLS
OFF – PQLS is disabled.
1 • If a listening mode other than AUTO SURROUND, ALC, DIRECT, PURE DIRECT or STEREO is selected while the
PQLS effect is enabled, the PQLS effect is disabled.
• When this receiver is connected by HDMI cable to a Pioneer player that is compatible with the PQLS function via
HDMI connection and a CD is played or HDMI reauthentication is performed (the HDMI indicator blinks), the PQLS
effect is enabled and the listening mode is set to AUTO SURROUND if a listening mode other than AUTO
SURROUND, ALC, DIRECT, PURE DIRECT or STEREO is selected.
RECEIVER
VSX-1020_UC.book 65 ページ ２０１０年１月７日 木曜日 午後６時０分
To Next Page
Loading...
Need help?
General
Weight and Dimensions
