Pioneer VSX 1020 User Manual

Basic Setup 04
41
En
English
Français
Deutsch
Nederlands
Italiano
Español
• If your component is connected via a
component video cable to an input
terminal other than the default, you must
tell the receiver which input terminal your
component is connected to, or else you
may see the composite video signals
instead of the component video signals.
1
7 When you’re finished, proceed to the
settings for other inputs.
There are optional settings in addition to the
assignment of the input jacks:
• Input Name – You can choose to rename
the input function for easier identification.
Select Rename to do so, or Default to
return to the system default.
• Input Skip – When set to ON, that input is
skipped when selecting the input using
INPUT SELECT or the front panel INPUT
SELECTOR dial. (DVD and other inputs can
be still be selected directly with the input
function buttons.)
8 When you’re finished, press RETURN .
You will return to the System Setup menu.
Input function default and possible
settings
The terminals on the receiver generally
correspond to the name of one of the input
functions. If you have connected components
to this receiver differently from (or in addition
to) the defaults below, see The Input Setup
menu on page 40 to tell the receiver how you’ve
connected up. The dots () indicate possible
assignments.
Note
1 For high-definition video (using component video connections), or when digital video conversion is switched off (in
Setting the Video options on page 70), you must connect your TV to this receiver using the same type of video cable as
you used to connect your video component.
4b.Input Setup
A/V RECEIVER
Exit Finish
Input : DVD
Input Name : Rename
Digital In : COAX-1
HDMI Input :
---
Input Skip : OFF
Component In : Comp-1
Input
function
Input Terminals
Digital HDMI Component
DVD COAX-1 
a
a.With Control set to ON in the HDMI Setup,
assignments cannot be made (see Control with HDMI
function on page 62).
IN 1
BD (BD)
TV/SAT OPT-1 
a

DVR/BDR OPT-2 
a
IN 2
VIDEO 
a

HDMI 1 
(HDMI-1)
HDMI 2 (HDMI-2)
HDMI 3
(HDMI-3)
HDMI 4
(HDMI-4)
HDMI 5
(front panel)
(HDMI-5)
INTERNET
RADIO
iPod/USB
CD COAX-2
CD-R/TAPE 
TUNER
ADAPTER
PORT
SIRIUS 
VSX-1020_UC.book 41 ページ ２０１０年１月７日 木曜日 午後６時０分

Pioneer VSX 1020 Specifications

General

Impedance	6 Ω
Frequency range	5 - 100000 Hz
Audio output channels	7.1 channels
Audio A/D Converter (ADC)	24-bit/96kHz
Signal-to-Noise Ratio (SNR)	100 dB
Total Harmonic Distortion (THD)	1 %
Audio system	Dolby TrueHD, DTS-HD Master Audio
Output power	140 W
Channels quantity	63 channels
Dimensions (WxDxH)	420 x 379 x 158 mm
Power requirements	AC 220 - 230 V, 50/60 Hz
HDMI ports quantity	7
Connectivity technology	Wired
Digital audio optical in	2
Product color	Black
Power consumption (standby)	0.6 W
Power consumption (typical)	245 W
Headphone connectivity	3.5 mm

Weight and Dimensions

Weight	10200 g