9.11
BRAKES
9
PARKING BRAKE CALIPER SERVICE
Exploded View
Caliper Removal
NOTE: Do not get oil, grease, or fluid on the parking
brake pads. Damage to or contamination of the pads
may cause the pads to function improperly.
1. Remove the clip pin and pin (A) from the parking brake
cable.
NOTE: Be sure the parking brake is not engaged.
2. If replacing the brake pads, slightly loosen the caliper
assembly bolts before removing the complete caliper
assembly. This will ease the caliper disassembly procedure
later.
Pad & Holder
Nut
Hex Head
Mount Bolt
Sleeve
Thrust Washer
Shim Pack
(4 Shims)
Pad & Holder
Lever
Asm. Bolt
Steel Balls (3)
Plain Washer
Hex Nut
Stationary Actuator
Compression Spring
Spring Pin
Figure 9.10
18 ft. lbs.
25 ft. lbs.
(24 Nm)
(34 Nm)
A
To Next Page
Loading...
Need help?
General
