3
3.43
9924707 - 2013–2014 RZR 800 Service Manual
© Copyright 2013 Polaris Sales Inc.
7. Inspect the bendix bushing (C) in the mag cover for
wear. Replace as needed.
Flywheel / Stator Removal / Inspection
1. Remove stator cover bolts and remove stator cover.
2. Remove flywheel nut and washer.
3. Install Flywheel Puller (PN 2871043) and remove
flywheel (A).
CAUTION
Do not thread the puller bolts into the flywheel more
than 1/4" or stator coils may be damaged.
4. Use caution when removing the wire holddown (B)
and the stator assembly (D). Do not tap or bump
the gear /stator housing cover or the stator. This
could cause the seal around the gear/stator housing
cover and the crankcase to break, causing a leak.
5. Remove the bendix (E) if necessary.
ENGINE
To Next Page
Loading...
Need help?
General
