EasyManuals Logo
Home>Polaris>Offroad Vehicle>RZR 800 2013

Polaris RZR 800 2013 User Manual

Polaris RZR 800 2013
500 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #74 background imageLoading...
Page #74 background image
3.12
9924707 - 2013–2014 RZR 800 Service Manual
© Copyright 2013 Polaris Sales Inc.
ENGINE COOLING SYSTEM
Cooling System Specifications
Condition
Coolant Temperature °F
C)
Room Temperature 68° F (20° C)
Thermostat Closed
175° F (79° C)
Thermostat Open 180° F (82° C)
Fan Off
194° F (90° C)
Thermostat Full Open Lift 202° F (94° C)
Fan On
205° F (96° C)
Engine Temperature
Overheat Indicator
Moving Vehicle: 235° F (113° C)
Idle Vehicle:
241° F (116° C)
Engine Protection
Ignition Misfire
Moving Vehicle: 239° F (115° C)
Idle Vehicle:
244° F (118° C)
Engine Protection
Shutdown
Moving Vehicle: 257° F (125° C)
Idle Vehicle:
262° F (128° C)
Item
Specification
Cooling System Capacity
RZR / RZR S
4.8 qts. (4.5 l)
RZR 4
5.5 qts. (5.2 l)
Pressure Cap Relief
13 PSI
Polaris Premium Antifreeze
2871534 - Quart
2871323 - Gallon
Recommended Coolant
Use only high quality antifreeze/coolant mixed with
distilled water in a 50/50 or 60/40 ratio, depending on
freeze protection required in your area.
CAUTION: Using tap water in the cooling system will
lead to a buildup of deposits which may restrict coolant
flow and reduce heat dissipation, resulting in possible
engine damage. Polaris Premium 60/40 Antifreeze/
Coolant is recommended for use in all cooling systems
and comes pre-mixed, ready to use.
Cooling System Pressure Test
1. Remove the hood from the front cab.
WARNING
Never remove pressure cap when engine is warm or
hot. The cooling system is under pressure and serious
burns may result.
Allow the engine to cool before servicing.
2. Remove pressure cap and pressure test the cooling
system using a commercially available tester.
3. The system must maintain 10 psi for five minutes. If
pressure loss is evident within five minutes, check
radiator, hoses, clamps and water pump seals.
Pressure Cap Test
1. Remove the front hood (see Warning under “Cooling
System Pressure Test”).
2. Remove pressure cap and test using a pressure cap
tester (commercially available).
3. The pressure cap relief pressure is 13 psi. Replace
cap if it does not meet this specification.
ENGINE

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polaris RZR 800 2013 and is the answer not in the manual?

Polaris RZR 800 2013 Specifications

General IconGeneral
BrandPolaris
ModelRZR 800 2013
CategoryOffroad Vehicle
LanguageEnglish

Related product manuals