Polaris RZR 800 2013 User Manual

6
6.9
9924707 - 2013–2014 RZR 800 Service Manual
© Copyright 2013 Polaris Sales Inc.
7. Mark the drive belt direction of rotation and remove
drive belt (see “DRIVE BELT - Belt Removal”).
8. Remove driven clutch retaining bolt and driven
clutch.
9. Remove driven clutch offset spacers from the
transmission input shaft if present.
10. Install the Drive Clutch Holder (PN 9314177) (A).
11. Remove drive clutch retaining bolt and remove drive
clutch using the Drive Clutch Puller (PA-48595) (B).
Drive Clutch Puller: PA-48595
Drive Clutch Holder: 9314177
12. Remove the (3) screws and (3) bolts that retain the
inner clutch cover to the engine and transmission.
PVT Assembly
1. Inspect inner clutch cover. Replace if cracked or
damaged.
2. Inspect the seal on the transmission input shaft.
Replace if damaged.
CLUTCHING

Polaris RZR 800 2013 Specifications

General

Brand	Polaris
Model	RZR 800 2013
Category	Offroad Vehicle
Language	English