7
7.15
9924707 - 2013–2014 RZR 800 Service Manual
© Copyright 2013 Polaris Sales Inc.
5. Pull sharply forward to remove it from transmission
shaft.
NOTE: You may have to loosen the front
gearcase mounting bolts to allow for propshaft
removal.
6. Remove the fasteners retaining the plastic skid plate
and remove the skid plate from the vehicle.
7. Remove the propshaft from the vehicle.
8. Reverse removal steps to reinstall propshaft.
IMPORTANT: Use a NEW roll pin upon
reassembly.
Removal / Installation (RZR 4)
1. Locate the propshaft roll pin and use the Roll Pin
Removal Tool (PN 2872608) to remove the roll pin.
NOTE: Front wheel can be removed to gain
better access to the propshaft roll pin.
Roll Pin Removal Tool (PN 2872608)
2. Remove both front seats.
3. Remove the gear selector cap.
4. Remove the retaining screw and the gear selector
handle.
5. Remove the fasteners retaining the center console to
access the propshaft support bearing.
FINAL DRIVE
To Next Page
Loading...
Need help?
General
