Qlogic QConvergeConsole CLI 2400 Series User Manual

10–Converged Network Adapter Interactive Commands
Loopback Test
SN0054667-00 C 10-115
Display Test Parameters
6. Loopback Test<port selection>2. FCoE1. Display Test Parameters
From the Loopback Test menu, select the Display Test Parameters option to
view the loopback test parameters. For example:
------------------------------------------------------------------------------
HBA Instance 0: QLE8242 Port 1 WWPN 21-00-00-0E-1E-04-95-EB PortID 11-00-20
------------------------------------------------------------------------------
--------------------
Diagnostics Settings
--------------------
Data Pattern : Random
Data Size (Bytes) : 8
Number of tests (1-65535): 10000
Test Increment(1-65535) : 1
Abort On Error : Ignore
Test Continuous : OFF
Loopback Type : Special Echo FCoE Loopback (252) in size
------------------------------------------------------------------------
Reset Test Parameters
6. Loopback Test<port selection>2. FCoE2. Reset Test Parameters
From the Loopback Test menu, select the Reset Test Parameters option to reset
the loopback test parameters to their default values. Table 10-1 lists the default
loopback test values.
Table 10-1. Default Loopback Test Parameter Values
Parameter Default Value
Data Pattern Random
Data Size (Bytes) 8
Number of tests 10,000
Test Increment 1
Abort On Error Ignore
Test Continuous OFF
Loopback Type Special Echo FCoE Loopback (252) in size

Qlogic QConvergeConsole CLI 2400 Series Specifications

General

Brand	Qlogic
Model	QConvergeConsole CLI 2400 Series
Category	Software
Language	English