Copier Functions
117
2
Specifying the first printing page and start number (“1/5,2/5…”)
A Press [Change] under Change Numbering.
B Press [First Printing Page]. Enter the original sheet number from which to start
printing, and then press the {q} key.
You can enter between 1 and 9999 for the original sheet number from which
to start printing.
C Press [First Printing Number], enter the number of page from which to start
numbering from with the number keys, and then press the {q} key.
D To change the number to end numbering, press [Last Number], enter that
number with the number keys, and then press the {q} key.
Proceed to step
E
when not changing.
If you want to number all pages to the end, press [to the End].
The last number is the last page number to print. For example, if Total Pages
is ten, if you want to print up to seven pages and do not want to print from
page 8 on, enter “7” for Last Number. Normally, you do not need to enter the
number.
E Press [Total Pages], enter the total number of original pages with the number
keys, and then press the {q} key.
F When page designation is complete, press [OK] three times.
G Place the originals, and then press the {Start} key.
Note
❒ To change the number entered in step
B
, press [Clear] or the {Clear/Stop}
key, and then enter a new number.
❒ To change the settings (the first printing page, the number of page from
which to start numbering, or total number of pages) after pressing [OK] in
step
F
, press [Change] and then enter the numbers again.
❒ To change a page number, press [StartPage], and then enter the number
with number keys.
To Next Page
Loading...
Need help?
General
