Placing Originals
18
1
Placing Originals on the Exposure Glass
Place originals on the exposure glass.
Important
❒ Do not lift the ADF forcefully. Otherwise, the cover of the ADF might open or
be damaged.
A Lift the ADF.
Be sure to lift the ADF by more than 30 degrees. Otherwise, the size of the
original might not be detected correctly.
B Place the original face down on the exposure glass. The original should be
aligned to the rear left corner.
Start with the first page to be copied.
A Positioning mark
B Left scale
C Lower the ADF.
Placing Originals in the Auto Document Feeder
Place originals in ADF.
There are four types of special originals. Setting should be made in the following situations:
❖ When placing originals consisting of more than 100 pages:
See “Batch mode”.
❖ When placing originals one by one:
See “SADF mode”.
❖ When placing originals of various sizes:
See “Mixed size mode”.
❖ When placing custom size originals:
See “Custom sizes”.
ANO040S
To Next Page
Loading...
Need help?
General
