Ricoh Aficio SP 3400SF User Manual

Using the Printer Function
102
3
Basic Operation in Printer Mode
The following procedure explains how to perform basic printing.
A Open the printer properties dialog box in your document's application.
B Set printing options as necessary, and then click [OK].
The printer properties dialog box closes.
C Click [OK].
Note
❒ You can select the priority tray using the [Tray Priority] setting under [PDL
Settings].
❒ If a paper jam occurs, printing stops after the current page has been printed
out. After the jammed paper is removed, printing restarts from the
jammed page automatically.
❒ After printing on envelopes, make sure to raise the levers for printing on
envelopes back to their original positions. Leaving the levers lowered can
cause print quality problems when printing on paper other than enve-
lopes.
Reference
For details about accessing the printer properties, see p.101 “Accessing the
Printer Properties from an Application”.
For details about [Tray Priority], see p.238 “PDL Settings”.
For details about how to remove the jammed paper, see p.272 “Removing
Printing Jams”.
For details about the levers for printing on envelopes, see p.79 “Loading
envelopes”.
If a Paper Mismatch Occurs
If the paper size or type does not match the print job's settings, the machine re-
ports an error. There are two ways to resolve this error:
❖ Continue printing using mismatched paper
Use the form-feed function to ignore the error and print using mismatched
paper.
❖ Reset the print job
Cancel printing.

Ricoh Aficio SP 3400SF Specifications