125
Various Shooting Functions
1
You can set the internal flash amount when the flash mode is set to
[Manual Flash] (GP.51). The flash amount can be set at [Full] or
[1/1.4], [1/2], [1/2.8], [1/4], [1/5.6], [1/8], [1/11], [1/16], [1/22], [1/32]
of the maximum amount.
1
Displaying the shooting menu.
• For the operating procedure, see P.103.
2
Press the " button to select [Man. Flash Amount] and
press the $ button.
3
Press the !" buttons to select
the desired setting.
4
Press the MENU/OK button.
• The setting appears on the screen
when the flash mode is set to [Manual
Flash].
Note ----------------------------------------------------------------------------------------------
• The value set in [Man. Flash Amount] is available only when the flash mode is set to
[Manual Flash]. (G P.51)
• When the flash mode is set to [Manual Flash], the [Man. Flash Amount] setting will be
enabled, the [Flash Expo.Comp.] setting will no longer be enabled.
• The [Man. Flash Amount] setting and the actual flash amount may differ slightly in
some cases.
Caution------------------------------------------------------------------------------------------
The flash amount is not adjusted automatically when the flash mode is set to [Manual
Flash]. Do not fire the flash near eyes (especially of infants) or at people who are driving,
etc.
Setting the Flash Amount in Manual
Flash Mode (Man. Flash Amount)
To Next Page
Loading...
Need help?
General
