234
6
Downloading Images to Your Computer
4
From the displayed drive,
copy a file to the desired
location.
• The figure below shows the folder
configuration in the drive.
• When the contents of the internal
memory are displayed, the drive
name is [RICOHDCI].
Caution------------------------------------------------------------------------------------------
• Do not force the USB cable into the terminal.
• Do not apply excessive force with the USB cable connected.
• When using the USB cable, do not move the camera with the USB cable.
1
Drag and drop the displayed drive or the volume icon to
the “Trash”.
• If a screen appears prompting you to enter the administrator’s
password, enter the password.
2
Disconnect the USB cable.
Note ----------------------------------------------------------------------------------------------
• You can also click [Eject] on the [Special] menu in Mac OS 9 or the [File] menu in Mac
OS X to cancel the connection.
• If the USB cable is disconnected without disabling the connection, the Unsafe
Removal of Device screen may be displayed. Be sure to stop the connection before
removing the USB cable.
• Do not disconnect the USB cable during image downloading. Make sure that
downloading has completed, disable the connection, and then disconnect the cable.
• When you connect your camera to a Macintosh computer, a file called “Finder .DAT/
DS_Store” may be created in your SD memory card, which will appear as [Unmatched
File] on your camera. You can delete this file from the SD memory card if you wish.
Disconnecting the Camera from Your Computer
To Next Page
Loading...
Need help?
General
