If you are using the camera for the first time, read this section.
37
1
Slide the release lever toward
“OPEN” to open the battery/
card cover.
2
Make sure the SD memory
card is facing the right way
and then push the card all the
way in until it clicks.
• The rechargeable battery may be
inserted first.
3
Insert the rechargeable
battery.
• Press the latch with the battery and
insert the battery all the way into the
battery compartment.
• When the rechargeable battery is
loaded in place, it is locked with the
latch.
4
Close the battery/card cover
and slide the release lever in
the opposite direction of
“OPEN” to lock it in place.
Loading the Battery and SD Memory Card
The rechargeable battery (DB-60) can be used to power this
camera. This battery is convenient because the battery power
lasts long and it can be used over and over again by recharging.
If the camera is already turned on, make sure it is turned off before
loading the battery and card.
1
2
Logo side
1
2
To Next Page
Loading...
Need help?
General
