Ricoh GX200 VF KIT User Manual

38
If you are using the camera for the first time, read this section.
Loading the Specified Dry Cell
Batteries (Available in Stores)
Insert the batteries in the direction
shown.
Close the battery/card cover by pressing
the battery cover closed while sliding the
release lever with your finger.
Removing the SD Memory Card
Slide the release lever toward “OPEN” to open the battery/card
cover. Push in the SD memory card and gently release to eject it.
Pull the card out of the camera.
Removing the Rechargeable Battery
Slide the release lever toward “OPEN” to open the battery/card
cover. Press and release the latch. The battery is ejected. Pull the
battery out of the camera. Be careful not to drop the battery when
removing it from the camera.
Removing the Dry Cell Batteries
Slide the release lever toward “OPEN” to open the battery/card
cover, and then remove the batteries. Be careful not to drop the
batteries when removing them from the camera.
Caution-----------------------------------------------------------------------------------------------
• When closing the battery/card cover, slide the release lever and be sure to lock it in
place.
• Remove the batteries if you are not going to use the camera for a long period of time.
Store the removed batteries in a dry cool place.

Ricoh GX200 VF KIT Specifications

General

Brand	Ricoh
Model	GX200 VF KIT
Category	Digital Camera
Language	English