Ricoh GX200 VF KIT User Manual

229
6
Downloading Images to Your Computer
After installing the software on your computer, connect your camera
to the computer.
1 Make sure the camera power is off.
2 Connect the USB cable to the
USB port of your computer.
3 Connect the USB cable to the
USB terminal of your camera.
• Your camera turns on and the
computer automatically reads the
necessary files.
4 RICOH Gate La starts and
image transfer begins automatically.
5 When image transfer is completed, disconnect the
camera and the computer. (GP.232)
Note ----------------------------------------------------------------------------------------------
• For how to use RICOH Gate La, refer to the “Software User Guide” (PDF file)
contained in the provided CD-ROM. (GP.225)
• If image transfer does not begin, re-start your computer and perform Steps 1 to 5
again.
Caution------------------------------------------------------------------------------------------
• Do not force the USB cable into the terminal.
• Do not apply excessive force with the USB cable connected.
• When using the USB cable, do not move the camera with the USB cable.
Downloading Images Using the RICOH Gate La

Ricoh GX200 VF KIT Specifications

General

Brand	Ricoh
Model	GX200 VF KIT
Category	Digital Camera
Language	English