217
Changing Camera Settings
5
You can view your still images and movies on a television screen by
connecting your camera to a television with the AV cable that came
with your camera. (GP.175)
Your camera is set to NTSC video format (used in North America
and other countries/regions) for use with television equipment and
other audiovisual equipment. If the equipment you want to connect
to uses PAL format (used in Europe and elsewhere), then switch
your camera to PAL format before connecting.
The default setting varies depending on where you purchased the
camera.
To change the video format, follow the steps below.
1
Display the setup menu.
• For the operating procedure, see P.184.
2
Press the " button to select [Video Out Mode] and
press the $ button.
3
Press the !" buttons to select
the desired setting.
4
Press the MENU/OK button.
Note ----------------------------------------------------------------------------------------------
This camera is not compatible with SECAM TV System.
Changing the Playback Method for
Viewing on TV (Video Out Mode)
Available Settings
NTSC
PAL
To Next Page
Loading...
Need help?
General
