86
Various Shooting Functions
1
7
Half-press the shutter release button.
• If [AE/AF] is selected, the Spot AE/Spot AF position is displayed.
• If [AF] is selected, the Spot AF position is displayed.
• If [AE] is selected, the Spot AE position and focusing frame are
displayed.
8
Gently press the shutter release button all the way.
When any of the following functions are assigned to the Fn1/Fn2
button (GP.195), you can change the settings for the functions
with fewer button operations.
Expo. Cmp, Wht. Bal., WB Correct, ISO, Quality, Focus, Image,
Expo. Met., Cont Mode, Auto BKT, Flash Comp, Flash Amt.
1
Set [Set Fn1/2 Button] to one of the above items on the
setup menu.
• For the operating procedure, see P.195.
2
With the camera ready to
shoot, press the Fn1/Fn2
button.
• The setting screen for that function
appears.
3
Press the !" buttons to
select the desired setting and
then press the ADJ. lever or
the MENU/OK button.
• For [WB Correct], press the !"#$ buttons or press the ADJ. lever
left or right to move the point to the desired position on the white
balance compensation map, and then press the MENU/OK button.
Note ----------------------------------------------------------------------------------------------
The settings for these functions can also be changed in the shooting settings menu.
(GP.100)
Setting Other Functions
Ok
RAW
1:1
(
9
M
)
N
3:2
(
10
M
)
RAW
(
12
M
)
RAW
3:2
(
10
M
)
F
4000
(
12
M
)
N
4000
(
12
M
)
F
3:2
(
10
M
)
To Next Page
Loading...
Need help?
General
