Managing Logs from the Machine
You can specify settings such as whether or not to transfer logs to the log collection server and whether
or not to delete all logs.
Disabling Log Transfer to the Log Collection Server
Use the following procedure to disable log transfer from the machine to the log collection server. Note
that you can switch the log transfer setting to [Off] only if it is already set to [On].
For details about the log collection server, contact your sales representative.
For details about the transfer log setting, see the log collection server manual.
1. Log in as the machine administrator from the control panel.
2. Press [System Settings].
3. Press [Administrator Tools].
4. Press [ Next] three times.
5. Press [Transfer Log Setting].
6. Press [Off].
7. Press [OK].
8. Log out.
Specifying Delete All Logs
Use the following procedure to delete all logs stored in the machine.
Deleting all logs from the machine as a batch can be achieved only if the log collection server is in use
or if the Web Image Monitor setting has been specified to collect job log, access log or eco-friendly log.
1. Log in as the machine administrator from the control panel.
2. Press [System Settings].
3. Press [Administrator Tools].
4. Press [ Next] three times.
5. Press [Delete All Logs].
6. Press [Yes].
7. Press [Exit].
8. Log out.
7. Managing the Machine
242
To Next Page
Loading...
Need help?
General
