• Press [Scan Settings], press [Full Color: Text / Photo] in the [Original Type] tab, and then
press [OK].
• Press [Original Feed Type], press [2 Sided Original], and then press [OK].
• Press [Send File Type / Name], press [PDF], and then press [OK].
For information about other settings, see "Various Scan Settings", Basic Operations.
7. Specify the destination.
You can specify multiple destinations.
For details, see page 367 "Specifying Scan to Folder Destinations".
8. Press the [Start] key.
• If any of the machine's security functions are enabled, select the destination from the registered
folder only when you send files by Scan to Folder.
• If you have selected more than one destination, you can press [ ] or [ ] next to the destination
field to scroll through the destinations.
• To cancel a selected destination, press [ ] or [ ] to display the destination in the destination field,
and then press the [Clear] key. You can cancel a destination selected from the destination list by
pressing the selected destination again.
• To cancel scanning, press the [Stop] key. Check the information displayed in the dialog box, and
then press any button.
• You can also store a file and simultaneously send it by Scan to Folder. For details, see
"Simultaneous Storage and Sending by Scan to Folder", Basic Operations.
• After scan files are sent, the destination and file name fields will be automatically cleared. If you
want to preserve the information in these fields, contact your local dealer.
• You cannot switch the screen while WSD or DSM destinations are being specified. To clear the
specified destination, display the destination in the destination field, and then press the [Clear] key.
• When the specified destination is updated using the Central Management function, the spooled
documents are sent to the destination after updating.
• For details about Central Management, see "Administrator Tools", Device Management.
9. Scan
366
To Next Page
Loading...
Need help?
General
