EasyManuals Logo
Home>Ricoh>All in One Printer>PRO C7210SX

Ricoh PRO C7210SX User Manual

Ricoh PRO C7210SX
552 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #93 background imageLoading...
Page #93 background image
Turning On/Off the Power
Turning On/Off the Power
Do not push the main power switch repeatedly.
When you push the main power switch, wait at least 10 seconds after it is confirmed that the main
power indicator has lit up or gone out.
If the main power indicator does not light up or go out in 5 minutes after you push the main power
switch, contact your service representative.
The main power switch is on the top left of the machine. When this switch is turned on, the main power
turns on and the main power indicator on the right side of the control panel lights up. When this switch is
turned off, the main power turns off and the main power indicator on the right side of the control panel
goes out. When this is done, machine power is off.
Confirm how much power the options draw, and then plug them into an outlet that is nearby but
separate from the outlet that the main machine is plugged into.
This machine automatically enters Fusing Unit Off mode, Low Power mode, or Sleep mode if you
do not use it for a while. For details, see page 92 "Saving Energy".
Turning On the Main Power
1. Make sure the power cord is firmly plugged into the wall outlet.
2. Open the main power switch cover, and then push the main power switch.
The main power indicator goes on.
DWP071
Turning On/Off the Power
91

Table of Contents

Other manuals for Ricoh PRO C7210SX

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ricoh PRO C7210SX and is the answer not in the manual?

Ricoh PRO C7210SX Specifications

General IconGeneral
BrandRicoh
ModelPRO C7210SX
CategoryAll in One Printer
LanguageEnglish

Related product manuals