12. Maintenance
This chapter explains how to perform daily maintenance tasks of the machine.
General Requirements
This section explains the items that should be followed during use of this machine.
Dos and Don'ts
• Do not place vases, plant pots, cups, toiletries, medicines, small metal objects, or containers
holding water or any other liquids, on or close to this machine. Fire or electric shock could result
from spillage or if such objects or substances fall inside this machine.
• Do not use flammable sprays or solvents in the vicinity of this machine. Also, avoid placing these
items in the vicinity of this machine. Doing so could result in fire or electric shock.
• Do not obstruct the machine's vents. Doing so risks fire caused by overheated internal
components.
• Unplug the power cord from the wall outlet before you move the machine. While moving the
machine, take care that the power cord is not damaged under the machine. Failing to take these
precautions could result in fire or electric shock.
• When disconnecting the power cord from the wall outlet, always pull the plug, not the cord.
Pulling the cord can damage the power cord. Use of damaged power cords could result in fire
or electric shock.
• Turn off the main power switch before unplugging the power cord. See page 91 "Turning On/Off
the Power".
• After scanning originals continuously, the exposure glass may become warm - this is not a
malfunction.
• The area around the vents might feel warm. This is caused by exhaust air and is not a malfunction.
• If the machine is moved from a cold to a warm place, condensation may form inside it. After
moving the machine, do not use it for at least an hour. The machine requires this time to adapt to its
new environment.
519
To Next Page
Loading...
Need help?
General
