Connecting to a Computer/DFE Remotely from
the Control Panel
The screen of a computer or DFE connected on a network can be displayed and operated on the
machine's control panel by using the app installed on the machine.
Using the machine's control panel, you can remotely operate a computer or DFE, and perform
operations such as instructing the machine to print.
Connecting to a Computer Remotely
Use the remote desktop client application to connect to a remote computer.
You can connect to an RDP (Remote Desktop Protocol) server that supports RDP Version 8.0
(compatible).
Connecting to a DFE Remotely
Use the DFE connection application to connect to a DFE remotely.
The DFE connection icon is displayed only when a DFE is connected to the machine. Also, the
name of the DFE connection icon varies depending on the type of DFE to be connected.
• You can connect to only one computer or DFE at one time.
• This function cannot be used while you are operating on the screen of the machine's control panel
remotely (see page 71 "Allowing Remote Connection from a PC or Tablet to the Control Panel").
• Up to six computers and only one DFE can be registered as the destinations.
• Press the Enter key twice to confirm the input text when using Microsoft IME (Roman input) on Fiery
to enter Japanese characters while connecting to Fiery.
Connecting to a Computer/DFE Remotely from the Control Panel
This section describes the procedure for connecting to a computer/DFE remotely from the control panel
of the machine.
Connecting to a Computer Remotely from the Control Panel
1. Press the [Home] ( ) icon at the center bottom of the screen.
2. Press .
3. Press the [APPS] tab.
4. Press the [Remote Desktop] icon.
5. Select a destination.
A remote connection starts, and the screen of the computer is displayed on the machine's
control panel.
3. Useful Functions
66
To Next Page
Loading...
Need help?
General
