4. Ring binder
Binds sheets of paper with a ring comb.
5. Multi-folding unit
Applies the following folds: Half Fold, Letter Fold-out, Letter Fold-in, Double Parallel Fold, Gate Fold, and Z-
fold.
6. Interposer
Inserts cover or slip sheets into copied or printed paper.
7. Buffer pass unit
Cools copies or prints.
8. Decurl unit
Flattens curls from sheets to prevent paper jams.
9. Three-tray wide LCT
Holds up to 4,400 sheets of paper. You can load paper whose sizes are up to SRA3 or 13 × 19
1
/
5
.
10. Multi bypass tray (Tray A)
Holds up to 500 sheets of paper.
11. Multi bypass attachment kit
Attaches the multi bypass tray (Tray A) to the two-tray wide LCT.
12. Banner sheet tray of multi bypass tray (Tray A)
Allows you to load large-sized paper in the multi bypass tray (Tray A).
13. SR5000 series output tray for banner sheet
Allows you to output paper that has a horizontal length of 487.8 mm (19.21 inches) or longer on Finisher
SR5050 or Booklet Finisher SR5060.
14. Finisher SR5050
Sorts, stacks, and staples multiple sheets of paper. Consists of the following paper trays:
• Finisher upper tray
• Finisher shift tray
Copies can be punched if the optional punch unit is installed on the finisher.
15. Perfect binder
Applies adhesive to the spine of gathered pages to bind them in a booklet.
16. A3/11 × 17 tray unit
You can load A3, 11 × 17 or larger size paper in Tray 1 using this unit. If you install the A3/11 × 17 tray unit
on your machine, you cannot use it as a tandem tray.
An indicator on the front left side of the tray lights while paper is feeding.
17. Interface box
Allows you to connect extended options to the machine.
4. Getting Started
82
To Next Page
Loading...
Need help?
General
