Rigol MSO1000Z series User Manual

Chapter 15 Accessibility Setting RIGOL
MSO1000Z/DS1000Z User’s Guide 15-7
System-related
Sound
When the sound is enabled, you can hear the sound of the beeper when you press a
function key or a menu softkey or when the prompt message pops up.
Press Utility  Sound to select (off) or (on). The default is off.
Language
This oscilloscope supports multiple languages. Press Utility  Language and use
to select the desired language. Then press down to select the language. This
oscilloscope will display the corresponding menus, help and prompt message using
this language.
System Information
Press Utility  System  System Info to view the system information of your
oscilloscope. The system information includes the manufacturer, model, serial
number as well as software and hardware version numbers.
Vertical Reference
When rotating VERTICAL SCALE to change the vertical scale of the analog
channel, you can expand and compress the signal vertically around the screen center
or signal ground level position.
Press Utility  System  VerticalRef. to select “Center” or “Ground”. The default
is “Ground”.
 Center: when the vertical scale is changed, the waveform will be expanded or
compressed around the screen center.
 Ground: when the vertical scale is changed, the waveform will be expanded or
compressed around the signal ground level position.
Power-off Recall
You can set the system configuration to be recalled when the oscilloscope is powered
on again after power-off. Press Utility  System  Power Set to select “Last” or
“Default”.
 Last: return to the setting of the system at last power-off.
 Default: return to the factory setting of the system.

Rigol MSO1000Z series Specifications

General

Brand	Rigol
Model	MSO1000Z series
Category	Test Equipment
Language	English