Rigol MSO1000Z series User Manual

Chapter 15 Accessibility Setting RIGOL
MSO1000Z/DS1000Z User’s Guide 15-11
Option Management
This oscilloscope provides multiple options to fulfill your measurement requirements.
Please contact your RIGOL sales representative or RIGOL technical support to
order the corresponding options. You can view the options currently installed on the
oscilloscope or activate the newly bought option serial number through this menu.
Press Utility  Options  Installed to view the options currently installed on the
oscilloscope and their information. Press Setup to enter the serial number activation
operation menu.
 Editor: press this softkey to select “ON” to turn on the serial number input
interface as shown in the figure below. Use
to select the character on the
virtual keyboard and press down the knob to input the character.
Figure 15-3 Option Serial Number Input Interface
 Backspace: press this softkey to delete the characters in the “Serial Number
Input Area” from the right to the left.
 Clear: press this softkey to clear all the characters in the “Serial Number Input
Area”.
 Apply: press this softkey and the oscilloscope will activate the corresponding
option using the serial number currently input.
Serial Number Input Area Character Selecting Area

Rigol MSO1000Z series Specifications

General

Brand	Rigol
Model	MSO1000Z series
Category	Test Equipment
Language	English